PAGE 1
Safe & Sound Weather Alert Clock Radio S.A.M.E.
PAGE 2
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The Rating Label is located at the bottom enclosure of the unit.
PAGE 3
FCC STATEMENT: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
PAGE 4
getting to know your all hazards weather alert radio For a step-by-step video describing this section, scan the QR code with your smartphone app or visit www.hellocapello.com/weather-radio-video/#1 Congratulations on your purchase of the Capello CR2W Safe & Sound Weather Alert Clock Radio. Protect yourself and your family or business from all hazards alerts for severe weather, natural disasters, civil emergencies and so much more! Customize the alerts for your geographic location using S.A.M.
PAGE 5
inserting the batteries Three (3) ‘AA’ size batteries can also be used to power the unit, as well as back-up for the clock, alarm time, preset memories if the AC adapter is disconnected or there is a power failure. Size ‘AA’ 1.5V Open the battery door by sliding it back and lifting up the edge. Insert three (3) ‘AA’ batteries as shown. Alkaline batteries are recommended for the longest playing time. Size ‘AA’ 1.5V Replace the battery door back on the compartment.
PAGE 6
location of controls 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 VOLUME DOWN – Button MENU Button VOLUME UP + Button LCD Display Antenna LEFT Button UP Button RIGHT Button ON / OFF Switch (side of unit) PRESET Button PRESET BAND Button BAND RADIO / SNOOZE Button WARNING LED (Red) WATCH LED (Orange) ADVISORY LED (Yellow) DOWN Button SELECT Button
PAGE 7
location of controls (con’t.) External Antenna jack Alert Jack Cloning Jack DC Power Jack 18 19 20 21 turning the unit on Refer to location of controls diagrams before operation. To turn the unit on, slide the ON / OFF switch, located on the side of the unit, to the ‘ON’ position. To turn the unit off, slide the switch to the ‘OFF’ position. adjusting the volume Press VOLUME UP + or VOLUME DOWN – button to increase or decrease the volume.
PAGE 8
function overview Below is a diagram of the functions of the Capello CR2W Safe & Sound Weather Alert Clock Radio. In the next sections we will walk you through the steps for setting up the different functions. You will need to scroll through the list below to advance to the next one.
PAGE 9
All programming uses a combination of ,+ or and or arrows. button is used to save settings. The menu consists of 11 customizable functions to scroll through and select your personalized settings. Press button to go back to previous function and to exit menu mode.
PAGE 10
initial setup of the basic functions In this section we will walk you through the steps for setting up the basic functions, which include TIME, ALARM, LANGUAGE, LED BACKLIGHT and ALERT TYPE. For a step-by-step video describing this section, scan the QR code with your smartphone app or visit www.hellocapello.com/weather-radio-video/#2 setting the time Press Press Press Press Press Press button until “TIME” is displayed. button; hour setting will begin to flash.
PAGE 11
setting the alarm Press button until “TIME” is displayed. Press arrow until “ALARM” is displayed. Press button and “OFF” will display, press or arrows to make your selection, alarm clock icon appears on display when “ON” Press again; hour setting will begin to flash. Press or arrows to adjust the hour setting. Press arrow to advance to and adjust both minute digits using or arrows. Press to save your alarm setting. Press to exit.
PAGE 12
setting the LED backlight Press button until “TIME” is displayed. Press or arrow until “LIGHT” is displayed. Press button to show current BACKLIGHT setting. Press arrow to change BACKLIGHT setting. Choose “BLT NORM” for blue back-light to turn on when any button is pressed and off after 5 seconds, or “BLT ON” for continuous back-light or “BLT OFF” for no back-light. Press to save your BACKLIGHT setting. Press to exit.
PAGE 13
finding your local S.A.M.E. codes In this section we will walk you through the steps for where you can locate your local S.A.M.E. code. For a step-by-step video describing this section, scan the QR code with your smartphone app or visit www.hellocapello.com/weather-radio-video/#3 First, determine if you want to leave your weather alert radio preset for ANY county or counties in broadcast range, or if you want to select specific county codes.
PAGE 14
programming your S.A.M.E. county codes In this section we will walk you through the steps for programming your local S.A.M.E. code(s). For a step-by-step video describing this section, scan the QR code with your smartphone app or visit www.hellocapello.com/weather-radio-video/#4 Your CR2W All Hazards Weather Alert Radio is preset to “ANY” to receive alerts and transmissions. If this is sufficient, leave the “COUNTY” setting to “ANY.” For more options, follow the menu selections: Customizing the S.A.M.
PAGE 15
programming your S.A.M.E. county codes (con’t.) Use the arrow to scroll through digits 0-9 to input the first digit, which will should always be set to “0.” Press the arrow to save each digit and advance to next digit for all 6. Press button to save the first MULTIPLE Code. Repeat steps to program up to 25 different county codes. Press button to save your S.A.M.E codes, then 3 times to exit. note: The display will automatically revert to clock when no buttons are pressed for more than 55 seconds.
PAGE 16
customizing your alert notifications In this section we will walk you through the steps to setup and customize the SIREN LEVEL, DEFEAT SIREN, NEW ALERT ADVISORY, ALERT TEST, REVIEW ALERTS as well as how to set the WEATHER BAND CHANNEL/FREQUENCY. For a step-by-step video describing this section, scan the QR code with your smartphone app or visit www.hellocapello.com/weather-radio-video/#5 choose an alert type (voice, siren or display) Press Press Press Press button until “TIME” is displayed.
PAGE 17
defeating an alert siren Press button until “TIME” is displayed. Press or arrow until “DEFEAT SIREN” is displayed. Press and then arrow to scroll through pre-defined event codes. Press for each event code relevant to your area to manually “ENABLE” or “DISABLE” (if you select “ENABLE”, the event alert remains on; if you select “DISABLE”, the event alert will turn off), using the arrow. Press after each setting change. Press to exit.
PAGE 18
adding a new alert The New Alerts function can be used to customize currently undefined future events that would otherwise display only as ??A=Unrecognized Watch, ??E = Unrecognized Emergency, ??S = Unrecognized Statement, or ??W = Unrecognized Warning. If a new event becomes defined or anticipated, you can program it by doing the following: Press button until “TIME” is displayed. Press or arrow until “NEW ALERT” is displayed.
PAGE 19
reviewing alerts The CR2W All Hazards Weather Alert Radio can store up to 10 different alerts (with overlapping effective times) in its memory. If the radio receives a new alert while a previous alert is still in effect, it automatically displays the new alert as scrolling text. To review past alerts that are still in effect, press the arrow to scroll through the last 10 active alerts stored in memory.
PAGE 20
selectable alert reference chart Event Code ADR AVA AVW BHW BWW BZW CAE CDW CEM CFA CFW CHW CWW DBA DBW DEW DMO DSW EAN EAT EQW EVI EVA FCW FFA FFS FFW Event Description Level Administrative Message Avalanche Watch Avalanche Warning Biological Hazard Warning Boil Water Warning Blizzard Warning Child Abduction Emergency Civil Danger Warning Civil Emergency Message Coastal Flood Watch Coastal Flood Warning Chemical Hazard Warning Contaminated Water Warning Dam Watch Dam Break Warning Contagious Disease War
PAGE 21
Event Code FLA FLS FLW FRW FSW FZW HLS HMW HUA HUW HWA HWW IBW IFW LAE LEW LSW NAT NIC NMN NPT NST NUW POS RHW RMT RWT SMW SPS Event Description Level Flood Watch Flood Statement Flood Warning Fire Warning Flash Freeze Warning Freeze Warning Hurricane Statement Hazardous Materials Warning Hurricane Watch Hurricane Warning High Wind Watch High Wind Warning Iceberg Warning Industrial Fire Warning Local Area Emergency Law Enforcement Warning Land Slide Warning National Audible Test National Information Cent
PAGE 22
Event Code SPW SVA SVR SVS TOA TOE TOR TRA TRW TSA TSW TXB TXF TXO TXP VOW WFA WFW WSA WSW ??A ??E ??S ??W Event Description Level Shelter In–Place Warning Severe Thunderstorm Watch Severe Thunderstorm Warning Severe Weather Statement Tornado Watch 911 Telephone Outage Emergency Tornado Warning Tropical Storm Watch Tropical Storm Warning Tsunami Watch Tsunami Warning Transmitter Backup On Transmitter Carrier Off Transmitter Carrier On Transmitter Primary On Volcano Warning Wild Fire Watch Wild Fire Warni
PAGE 23
test signals broadcast by NWS In this section we will walk you through the steps for where you can locate testing information provided by the National Weather Service and when they will be transmitting test signals. For a step-by-step video describing this section, scan the QR code with your smartphone app or visit www.hellocapello.com/weather-radio-video/#6 All National Weather Service (NWS) stations periodically transmit test signals.
PAGE 24
using the AM/FM radio In this section we will walk you through the steps for selecting reception band, selecting stations and how to save preset channels. For a step-by-step video describing this section, scan the QR code with your smartphone app or visit www.hellocapello.com/weather-radio-video/#7 There is a digital AM/FM radio built into the All Hazards Weather Alert Radio. Listen to news, sports, music and more without disrupting the weather radio functions.
PAGE 25
? troubleshooting If you experience a problem with this unit, please check the chart below before calling for service. PROBLEM SUGGESTION No Power Check wall outlet and back of unit to make sure power adapter is securely plugged in at both ends. No Volume Check Volume Control to make sure it is not set at lowest level. Poor Reception Try different locations for the radio within your home or business to improve reception, adjust antenna and/or or add additional external antenna (sold separately).
PAGE 26
specifications general: Power Source (AC Adapter) ........................................................................................................AC 120V, 60Hz Power Source (Main unit) ........................................................................................................... DC 7V, 300mA Power Source (Backup). ...........................................................................................3 x 1.5V “AA” size batteries Speaker. ..............................................
PAGE 27
notes
PAGE 28
For step-by-step videos describing ALL the functions, scan the QR code with your smartphone app or visit www.hellocapello.com/weather-radio-video/#8 For further assistance, please visit our website: hellocapello.com or contact customer service at support@capelloproducts.com or 1-855-896-1795 Life Lab International Ltd.
