Home of Racing's Best and Brightest
Skip to content
- Quick links
- Active topics
- Search
- Active topics
- FAQ
- HotPass membership
- Subscriptions
- Login
- Register
- Speed-Talk.comBoard indexTechnicalEngine Tech
- Speed-Talk Google Search
- Search
LS cam bearing failures
Moderator: Team
Post Reply
- Print view
10 posts• Page 1 of 1
- machinedave
- Guru
- Posts: 1130
- Joined: Mon Mar 24, 2014 1:08 am
- Location:
LS cam bearing failures
- Quote
Postby machinedave »
Lately in the shop I have seen some 6.0l GM engines come in with spun cam bearings that have caused a few otherwise good cores to be useless. Is anybody making an oversized OD cam bearing set for these blocks? If not does anyone know of any other fixes?
Top
- 1972ho
- Guru
- Posts: 1308
- Joined: Thu Nov 21, 2013 12:52 am
- Location:
Re: LS cam bearing failures
- Quote
Postby 1972ho »
Roller cam bearing
Top
- engineguyBill
- Guru
- Posts: 1264
- Joined: Fri Feb 26, 2010 11:15 am
- Location: Gold Canyon, AZ
Re: LS cam bearing failures
- Quote
Postby engineguyBill »
machinedave wrote:Lately in the shop I have seen some 6.0l GM engines come in with spun cam bearings that have caused a few otherwise good cores to be useless. Is anybody making an oversized OD cam bearing set for these blocks? If not does anyone know of any other fixes?
Durabond has some oversize OD cam bearings available. Not sure about LS applications though. Give them a call.
Bill
Perfect Circle Doctor of Motors certification
SAE Member (30 years)
ASE Master Certified Engine Machinist (+ two otherASE Master Certifications)
AERA Certified Professional Engine Machinist
Top
- A_VAS
- Pro
- Posts: 208
- Joined: Thu Dec 03, 2009 1:52 pm
- Location: Harrisburg, PA
Re: LS cam bearing failures
- Quote
Postby A_VAS »
last I had a problem, Durabond did have .020 undersized ID bearings for the LS. Bored them to size
Now for the OD problem, not sure what you will get into
too lazy to make power w/o boost
Top
- machinedave
- Guru
- Posts: 1130
- Joined: Mon Mar 24, 2014 1:08 am
- Location:
Re: LS cam bearing failures
- Quote
Postby machinedave »
I can get another 6.0L for about $400 so I have to consider the cost of the oversize OD bearings and the machining to oversize the housing bores but it is so hard for me to give up on a "patient".
Top
- machinedave
- Guru
- Posts: 1130
- Joined: Mon Mar 24, 2014 1:08 am
- Location:
Re: LS cam bearing failures
- Quote
Postby machinedave »
I just discovered a set of oversize OD LS cam bearings. Durabond part number CHP-25R1.
Top
- In-Tech
- Vendor
- Posts: 2826
- Joined: Wed Apr 21, 2010 4:35 am
- Location: Fresno, CA
Re: LS cam bearing failures
- Quote
Postby In-Tech »
More Durabond info for LS, cam saver and block saver info as well as some replacement parts.
You do not have the required permissions to view the files attached to this post.
Heat is energy, energy is horsepower...but you gotta control the heat.
-Carl
Top
- BILL-C
- Expert
- Posts: 754
- Joined: Thu Feb 07, 2008 9:57 pm
- Location: Oakville, CT
- Contact:
Contact BILL-C
Re: LS cam bearing failures
- Quote
Postby BILL-C »
Which cam b location spun? We just fixed an LSX block by boring spun housing bore for bearing for a different location that was .020 bigger od.
Carlquist Competition Engines
Top
- machinedave
- Guru
- Posts: 1130
- Joined: Mon Mar 24, 2014 1:08 am
- Location:
Re: LS cam bearing failures
- Quote
Postby machinedave »
BILL-C wrote: ↑Thu Jun 07, 2018 12:30 pmWhich cam b location spun? We just fixed an LSX block by boring spun housing bore for bearing for a different location that was .020 bigger od.
Its usually the #3 housing bore. I've thought about that too. Did you have good alignment after boring just the center?
Top
- BILL-C
- Expert
- Posts: 754
- Joined: Thu Feb 07, 2008 9:57 pm
- Location: Oakville, CT
- Contact:
Contact BILL-C
Re: LS cam bearing failures
- Quote
Postby BILL-C »
Yes, good alignment. Cam bearing squirmed out towards back, leaving a small, un-damaged area to measure and center up on. We used .0055 press fit.
Carlquist Competition Engines
Top
Post Reply
- Print view
10 posts• Page 1 of 1
Return to “Engine Tech”
Jump to
- Speed-Talk
- ↳ Announcements
- ↳ In Memory of Don Terrill
- Technical
- ↳ Engine Tech
- ↳ Advanced Engine Tech
- ↳ Vintage/Classic/Historical Engine Tech
- ↳ Chassis / Suspension / Body
- ↳ General Tech
- ↳ Subscribe to HotPass
- ↳ Speed-Talk Vendor Marketplace
- ↳ Auto Gear Equipment
- ↳ CCA Racing Products
- ↳ Competition Fuel Systems
- ↳ Heads 1st
- ↳ Jones Cam Designs
- ↳ Koehler Injection
- ↳ Lightning Racing Carbs
- ↳ MaxRaceSoftware
- ↳ PBM-Erson
- ↳ Schmidt Motor Works
- ↳ Speier Racing Heads
- ↳ Stan Weiss' Software
- ↳ TFX Engine Technology Inc.
- ↳ Speed-Talk interviews
- ↳ David Vizard forum
- ↳ HotPass Advanced Tech forums
- ↳ Valve Train
- ↳ EFI
- ↳ Supercharging
- ↳ Chassis setup
- General Category
- ↳ Industry / Business
- ↳ Forum Help / Questions / Tips
- Classifieds
- ↳ Shop Equipment - For Sale or Wanted
- ↳ Other - For Sale or Wanted
- Offtopic forums
- ↳ Offtopic Forum
- Board index
- All times are UTC-04:00
- Delete cookies
- HotPass membership
Powered by phpBB® Forum Software © phpBB Limited
Privacy|Terms